Code: 191
Description: Output Tray Is Full, Unload Paper The Full Stack Sensor indicates the output tray is full.
Causes: • Full Stack Sensor, PL5.4.1 • Full Stack Actuator, PL5.4.2 • FRONT/DUP Harness, PL5.3.28
Remedy: 1 Check the following for evidence of fault or damage: • Full Stack Sensor, PL5.4.1 • Full Stack Sensor Actuator, PL5.4.2 Replace the parts concerned. Go to Step 2. 2 Test the Full Stack Sensor. Run the Service Diagnostics Full Stack Sensor test. Does the sensor function correctly? Replace the Engine Control Board. Go to Step 3. 3 Check the Full Stack Sensor connection. Is P/J134 connected to the harness? Go to Step 4. Reconnect the sensor. 4 Replace the Full Stack Sensor. Does the error persist? Go to Step 5. Complete 5 Check all pins on the FRONT/DUP Harness PL5.3.28 for continuity. 1. Disconnect P/J13 and P/J134. 2. Check continuity between J13 <=> J134. Replace the Engine Control Board. Replace the FRONT/DUP Harness.