Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 44 — Xerox Phaser 6350

Code: 44

Description: Fuser Failure The Fuser heater control circuitry has failed.
Causes: • Fuser, PL5.1.1 • FSR/ADC Harness, PL5.2.28 • LVPS, PL9.1.6 • Engine Control Board, PL9.1.16 • LV Harness, PL10.1.2
Remedy: 1 Check the Fuser label for the correct rating. Is the Fuser properly rated (110v / 220v)? Go to Step 2. Replace the Fuser. 2 Check the Fuser for damage. Is the Fuser connector damaged? Replace any damaged parts. Go to Step 3. 3 Replace the Fuser. Does the error persist? Go to Step 4. Complete 4 Replace the LVPS. Does the error persist? Go to Step 5. Complete 5 Check all pins on the FSR/ADC Harness PL5.2.28 for continuity. 1. Disconnect P/J162 and P/J361. 2. Check continuity between J162<=>J361. Go to Step 6. Replace the FSR/ ADC Harness. 6 Check all pins on the LV Harness PL10.1.2 for continuity. 1. Disconnect P/J61 and P/J165. 2. Check continuity between J61 <=> J165. Replace the Engine Control Board. Replace the LV Harness.

← Xem tất cả mã lỗi Xerox Phaser 6350

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie