Code: 160, 162, 163
Description: Insert Tray [3] [4] [5] or Tray [3] [4] [5] Missing The tray’s Paper Size Switch indicates that the reported tray is not installed. Tray 3 can refer to either optional feeder. Code 160: Insert Tray 3 Code 162: Insert Tray 4 Code 163: Insert Tray 5
Causes: For 550-Sheet Feeder: • Paper Size Switch, PL11.2.6 • Paper Tray, PL11.4.1 • SIZE Harness, PL11.2.8 • OPFREC Harness, PL11.1.6 For 1100-Sheet Feeder: • Paper Size Switch, PL12.2.6 • Paper Tray, PL12.6.1 • SIZE2 Harness, PL12.3.5 • OPFREC2 Harness, PL12.3.1
Remedy: 1 Check the affected tray for damage: • Paper Size Switch, PL11.2.6, PL12.2.6 • Paper Size Switch Actuators, PL11.4.10, PL12.6.10 • Paper Tray, PL11.4.1, PL12.6.1 Is there any damage? Replace the damaged parts. Go to Step 2. 2 Test the affected Paper Size Switch. Run the Service Diagnostics Paper Size Switch test.Use the table on. Do the switches function correctly? Replace the Engine Control Board. Go to Step 3. 3 Check the Paper Size Switch signals. Verify +3.3 V on pins: P/J821-1 <=> P/J80-4 P/J821-3 <=> P/J80-2 P/J821-4 <=> P/J80-1 Is there +3.3 V when actuated? Go to Step 4 Replace the affected Paper Size Switch. 4 Check all pins on the SIZE Harness for continuity. 1. Disconnect P/J80 and P/J821. 2. Check continuity between J80 <=> J821 Go to Step 5. Replace the SIZE Harness. 5 Check all pins on the OPFREC Harness for continuity. 1. Disconnect P/J171 or P/J172 and P/J83. 2. Check continuity between J171/2 <=> P83 Replace the Engine Control Board. Replace the affected OPFREC Harness.