Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 176 — Xerox Phaser 6360

Code: 176

Description: Wrong Paper Size; Load Tray 1 (MPT) with [size][type] Tray 1 (MPT) Paper Size mismatch error.
Causes: • Tray 1 (MPT) No Paper Sensor, PL3.2.5
Remedy: 1 Check the Tray 1 (MPT) No Paper Sensor for evidence of fault or damage: Is there any damage? Replace any damaged parts. Go to Step 2. 2 Test the Tray 1 (MPT) No Paper Sensor Run the Service Diagnostics Tray 1 (MPT) No Paper Sensor test. Does the sensor function correctly? Go to Step 4. Go to Step 3. 3 Check all pins on the FRONT/DUP Harness for continuity. 1. Disconnect P/J13 and P/J135. 2. Check continuity between J13<=>J135. Go to Step 4. Replace the FRONT/DUP Harness. 4 Check the No Paper Sensor signal at the Engine Control Board. Is there 3.3V at P13-15 when actuated? Replace the No Paper Sensor Replace the Engine Control Board.

← Xem tất cả mã lỗi Xerox Phaser 6360

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie