Code: 40 ... 43
Description: Fuser Failure The Fuser temperature regulation has failed. Code 40: The temperature sensor sensed an overheat condition. Code 41: The temperature sensor sensed a low temperature condition. Code 42: Temperature sensor not providing an output. Code 43: Warm up failure.
Causes: • Fuser, PL5.1.1 • FSR/ADC Harness, PL5.2.28 • LVPS, PL9.1.6 • Engine Control Board, PL9.1.16
Remedy: 1 Check the Fuser label for the correct rating. Is the Fuser properly rated (110v / 220v)? Go to Step 2. Replace the Fuser. 2 Check the Fuser for damage. Is the Fuser connector damaged? Replace the Fuser. Go to Step 3. 3 Replace the Fuser. Does the error persist? Go to Step 4. Complete 4 Replace the LVPS. Does the error persist? Go to Step 5. Complete 5 Check all pins on the FSR/ADC Harness PL5.2.28 for continuity. 1. Disconnect P/J36 and P/J361. 2. Check continuity between J36 <=> J361. Replace the Engine Control Board. Replace the FSR/ ADC Harness.