Remedy: 1 Check the document Does the document meet the ADF SPEC? Go to step 2. Use the platen mode or change the paper type. 2 Check the connector connection Reseat the connector (P/J1003) on the IP Board. Does the error still occur when copying? Go to step 3. Complete. 3 Check the ADF Is the ADF closed against the platen glass completely? Go to step 4. Close the ADF completely. 4 Check the paper feeding Does the ADF feed the document? Go to step 5. Go to step 7. 5 Check the document path Open the ADF Cover and check the document path. Is there a foreign substance on the document path? Remove the foreign substance. Go to step 6. 6 Replace the ADF Assy. Does the error still occur when copying? Replace the IP Board . Complete. 7 Check the ADF Feed Roller installation Is the roller installed correctly? Also are they not contaminated or damaged, and rotate smoothly? Replace the ADF Assy. Replace the Feed Roller Assy & Separator Pad Assy.