Code: 010-397
Description: IOT Fuser Failure
Causes: • Fuser Assy (PL6.1.1) • Fuser Harness Assy (PL6.1.2) • LVPS (SFP PL 8.2.1; MFP PL8.2.12) • MCU Board (SFP PL8.2.13; MFP PL8.3.6) • LVPS Main Harness Assy (PL9.1.3)
Remedy: 1 Does the error still occur when the power is turned Off and On? Go to step 2. Complete. 2 Reseat the Fuser Assy. Does the error still occur when the power is turned Off and On? Go to step 3. Complete. 3 Remove the Fuser Assy. Check the connections between the MCU Board (P/J17) and Fuser Assy (P/J171). Check the connections between the Fuser Assy (P/J171) and LVPS (P/J47). Check the connections between the LVPS (P/J501 and P/J502) and MCU Board (P/J14 and P/J15). Are these connectors connected correctly? Go to step 5. Reconnect the connector(s) P/J17, P/J47, P/J171, P/J501, P/J502, P/J14 and/or P/J15 correctly, then go to step 4. 4 Does the error still occur when the power is turned Off and On? Go to step 5. Complete. 5 Check the Fuser Harness Assy for continuity. Disconnect J17 from the MCU Board. Disconnect J47 from the LVPS. Is each cable of J17 and J47 <=> P171 continuous? NOTE P171 is attached to the frame. Go to step 6. Replace the Fuser Harness Assy. 6 Check the LVPS Main Harness Assy for continuity. Disconnect J14 from the MCU Board. Disconnect J501 from the LVPS. Is each cable of J14 <=> J501 continuous? Go to step 7. Replace the LVPS Main Harness Assy. 7 Replace the Fuser Assy. Does the error still occur when the power is turned Off and On? NOTE After replacing the Fuser, be sure to reset the Fuser counter. Go to step 8. Complete. 8 Check after the LVPS. Replace the LVPS. Does the error still occur when the power is turned Off and On? Replace the MCU Board Complete.