Description: Print head contact error before non-ejection detection (support number : 4801)
Causes: Sending command to the print head is disabled.
Remedy: 1 Remove the print head and check the condition of print head contacting part. Proper condition Go to 2. Abnormal condition Clean the surface of the print head contacting part. (The waste cloth without a nap must be used.) * After connecting the flexible cable, when this error occurs at printer rebooting, the cause is connection of the FLEXIBLE CABLE UNIT. Check the cable connection, and reboot the printer. 2 Perform [DIAGNOSIS > CR_SYSTEM_CHECK] to diagnose carriage system. No problem Replace the print head. Abnormal • Problem in ACC. SENSOR CHECK or CR VIBRATIONCHECK Replace CARRIAGE UNIT. • Problem in LONG FFC CHECK or CRC value changes after turning the printer off and back on Replace FLEXIBLE CABLE UNIT.