Remedy: 1 Check after resetting the IP Board and MCU Board. Reseat the IP Board and MCU Board. Does the error still occur when the power is turned Off and On? Go to step 2. Complete. 2 Check the connections between the MCU Board and IP Board. Are P/J10 and SFP P/J101 or MFP P/J2001properly connected? Go to step 4. Reconnect the connector(s) P/J10 and/or P/J101 or P/J2001, then go to step 3. 3 Does the error still occur when the power is turned Off and On? Go to step 4. Complete. 4 Check the IP Board Harness Assy for continuity. Disconnect J10 from the MCU Board. Disconnect J101 from the SFP IP Board or J2001 from the MFP IP Board. Is each wire in the harness continuous? Go to step 5. Replace the IP Board Harness Assy. 5 Check the firmware version Is the firmware the latest version? Go to step 6. Update the firmware. 6 Replace the IP Board. Does the error still occur when the power is turned Off and On? Replace the MCU Board. Complete.