Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 077-215 — Xerox Phaser 6500

Code: 077-215

Description: IOT Duplexer Failure
Causes: • Option Harness Assy (PL3.1.20) • MCU Board (SFP PL8.2.13; MFP PL8.3.6) • Duplex Harness Assy (PL11.1.14) • Duplex Unit (PL11.1.1)
Remedy: 1 Check the Option Duplex for installation. Is the Option Duplex installed correctly? Go to step 3. Reseat the Option Duplex, then go to step 2. 2 Does the error still occur when the power is turned Off and On? Go to step 3. Complete. 3 Check the connections between the Duplex Board and MCU Board. Are P/J27, P/J271, P/J272 and P/J 601 connected surely? Go to step 5. Reconnect the connector(s) securely, then go to step 4. 4 Does the error still occur when the power is turned Off and On? Go to step 5. Complete. 5 Check the Duplex Harness Assy for continuity. Disconnect P/J601 from the Duplex Board. Disconnect P/J271 from the Option Harness Assy. Is each cable of P/J601 <=> P/J271 continuous? Go to step 6. Replace the Duplex Harness Assy. 6 Check the Option Harness Assy for continuity. Disconnect P/J27 from the MCU Board. Disconnect P/J 271 from the HARNESS ASSY DUP. Is each cable of P/J27<=> P/J271 continuous? Go to step 7. Replace the Option Harness Assy. 7 Check after replacing the Duplex Unit. Replace the Duplex Unit. Does the error still occur when the power is turned Off and On? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie