Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 077-301 — Xerox Phaser 6500

Code: 077-301

Description: IOT Side Cover Open
Causes: • Toner Door (SFP PL1.1.7;MFP PL1.1.7) • Toner Door Switch (PL5.1.9) • Toner Dispenser Assembly (PL5.1.1) • MCU Board (SFP PL8.2.13; MFP PL8.3.6)
Remedy: 1 Check the Toner Door for shape. Are there any damages on the Toner Door? Replace the Toner Door. Go to step 2. 2 Check the Toner Door for latching. Open and close the Toner Door. Is the Toner Door latched correctly? Go to step 3. Replace the Toner Door. 3 Check the Toner Door Switch (PL5.1.9) for operation. In the Printer Diagnostic tests, use Engine Diag > Sensor Test > Side Switch. Does the number on the screen increase by one, when the Toner Door is closed and opened? Replace the MCU Board. Go to step 4. 4 Check the Toner Door Switch Harness for continuity. Disconnect J29 from the MCU Board. Disconnect J291 from the Toner Door Switch. Is each cable of J29 <=> J291 continuous? Go to step 5. Replace the Toner Dispenser Assembly. 5 Replace the Toner Door Switch. Does the error still occur when the power is turned Off and On? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie