Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 091-912 — Xerox Phaser 6500

Code: 091-912

Description: PHD Tape Staying
Causes: • Imaging Unit (PL4.1.21) • MCU Board (SFP PL8.2.13; MFP PL8.3.6)
Remedy: 1 Turn off the power, and open the Front Cover. Remove the Imaging Unit. Have all eight sealing tapes been removed? After Check, reseat the Imaging Unit correctly. Go to step 3. Pull out the sealing tapes, then go to step 2. 2 Does the error still occur when the power is turned Off and On? Go to step 3. Complete. 3 Replace the Imaging Unit. Caution: Be sure to pull all eight sealing tapes out from a new Imaging Unit before installation. Does the error still occur when the power is turned Off and On? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie