Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 091-916 — Xerox Phaser 6500

Code: 091-916

Description: IOT PHD CRUM ID Error
Causes: • Imaging Unit (PL4.1.21) • MCU Board (SFP PL8.2.13; MFP PL8.3.6) • PHD XPRO Harn Assy (PL9.1.11)
Remedy: 1 Does the error still occur when the power is turned Off and On? Go to step 2. Complete. 2 Check the Imaging Unit type. Is the correct Imaging Unit installed? Go to step 4. Replace the Imaging Unit, then go to step 3. 3 Does the error still occur when the power is turned Off and On? Go to step 4. Complete. 4 Reseat the Imaging Unit. Does the error still occur when the power is turned Off and On? Go to step 5. Complete. 5 Are P/J42 and P/J422 connected correctly? Go to step 7. Reconnect the connector(s) P/ J42 and/or P/ J422 securely, then go to step 6. 6 Does the error still occur when the power is turned Off and On? Go to step 7. Complete. 7 Check the PHD XPRO Harness Assy for continuity. Disconnect P422 from the Imaging Unit. Disconnect J42 from the MCU Board. Is each cable of P422 <=> J42 continuous? Go to step 8. Replace the PHD XPRO Harness Assy. 8 Replace the Imaging Unit. Does the error still occur when the power is turned Off and On? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie