Code: 072-100
Description: IOT Tray2 Misfeed JAM Detect Tray2 Misfeed
Causes: • Path Sensor [550 Option Main Feed Assembly] (PL10.2.1) • 550 Option Regi Clutch Assembly (PL10.2.2) • 550 Option Feed Clutch Assembly (PL10.1.8) • 550 Option Drive Assembly (PL10.1.9) • Feed Roller Assembly (PL10.2.3) • Tray Retard Holder Assembly (PL10.3.3) • C2 Size Harness Assembly (PL10.1.14) • C2 Turn Harness Assembly (PL10.1.15) • Feeder Motor Harness Assembly (PL10.1.16) • 550 Option Feeder Board (PL10.1.10) • MCU Board (PL18.1.13)
Remedy: 1 Check the Tray 2 installation Is Tray 2 installed properly? Go to step 2. Install Tray 2 properly. 2 Check the paper path Are there any foreign objects, or paper pieces, etc. on the paper path? Remove the foreign objects, or paper pieces, etc. Go to step 3. 3 Check the paper feed roller Is the paper feed roller (the roller on the possible causative parts list) installed properly? Go to step 4. Reinstall the paper feed roller. 4 Check the paper feed roller Is the paper feed roller (the roller on the possible causative parts list) deformed or worn out? Replace the paper feed roller. Go to step 5. 5 Check the Path Sensor operation Execute Digital Input diagnostic test 071-117, and check the Path Sensor operation. Does the Path Sensor function normally? Go to step 6. 6 Check the 550 Option Regi Clutch Assembly operation Execute Digital Output diagnostic test 071-020, and check the 550 Option Regi Clutch Assembly operation. Does the 550 Option Regi Clutch Assembly function normally? Go to step 7. 7 Check the 550 Option Feed Clutch Assembly operation Execute Digital Output diagnostic test 071-022, and check the 550 Option Feed Clutch Assembly operation. Does the 550 Option Feed Clutch Assembly function normally? Go to step 8. 8 Check the 550 Option Drive Assembly operation Execute Digital Output diagnostic test 071-014, and check the 550 Option Drive Assembly rotation. Does the 550 Option Drive Assembly function normally? Replace the MCU Board.