Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 075-100 — Xerox Phaser 6600

Code: 075-100

Description: MSI Misfeed JAM Detect VSYNC On JAM(TBD)
Causes: • Regi Sensor [Regi Chute Assembly] (PL15.2.1) • Bypass Tray Feed Solenoid (PL13.2.9) • Paper Transport Motor [Drive Assembly] (PL3.1.1) • Feed Roller Assembly (PL13.2.10) • Retard Holder Assembly (PL13.3.14) • TA1 Roller Assembly (PL13.1.2) • TA2 Roller Assembly (PL13.1.3) • Bypass Tray Harness Assembly (PL13.2.5) • MCU Board (PL18.1.13)
Remedy: 1 Check the Bypass Tray installation Is the Bypass Tray installed properly? Go to step 2. Install the Bypass Tray properly. 2 Check the paper path Are there any foreign objects, or paper pieces, etc. in the paper path? Remove foreign objects, or paper pieces, etc. Go to step 3. 3 Check the paper feed roller Is the paper feed roller (the roller on the possible causative parts list) installed properly? Go to step 4. Reinstall the paper feed roller. 4 Check the paper feed roller Is the paper feed roller (the roller on the possible causative parts list) deformed or worn out? Replace the paper feed roller. Go to step 5. 5 Check the Regi Sensor operation Execute Digital Input diagnostic test 071-103, and check the Regi Sensor operation. Does the Regi Sensor function normally? Go to step 6. 6 Check the Bypass Tray Feed Solenoid operation Execute Digital Output diagnostic test 071-007, and check the Bypass Tray Feed Solenoid operation. Does the Bypass Tray Feed Solenoid function normally? Go to step 7. 7 Check the Paper Transport Motor operation Execute Digital Output diagnostic test 071-004, and check the Paper Transport Motor rotation. Does the Paper Transport Motor function normally? Replace the MCU Board.

← Xem tất cả mã lỗi Xerox Phaser 6600

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie