Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 092-670 — Xerox Phaser 6600

Code: 092-670

Description: Yellow Patch Error IOT could not recovery toner density.
Causes: • Yellow Imaging Unit (PL8.1.2) • Yellow Toner Cartridge (PL5.1.8) • MCU Board (PL18.1.13)
Remedy: 1 Check after reinstalling the Toner Cartridge Pull out and shake the Yellow Toner Cartridge, and then reinstall it. Does the error still occur? Go to step 2. Finished. 2 Check after replacing the Toner Cartridge Replace the Yellow Toner Cartridge. Does the error still occur? Go to step 3. Finished. 3 Check the Imaging Unit installation Take out the Yellow Imaging Unit. Is the connection part of the Yellow Imaging Unit clean? And, is the Yellow Imaging Unit touching against the guides on the left and right sides, and installed properly? Go to step 4. Clean the connection part. Reinstall the Yellow Imaging Unit. 4 Check after replacing the Yellow Imaging Unit Replace the Yellow Imaging Unit. Does the error still occur? Replace the MCU Board. Finished.

← Xem tất cả mã lỗi Xerox Phaser 6600

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie