Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 09-600-00, 09-601-00 — Xerox Phaser 6700

Code: 09-600-00, 09-601-00

Description: Waste Cartridge is Full / Near Full The Waste Toner Full Sensor indicates the cartridge is full or nearly full. • 09-600-00 Waste Cartridge is Near Full • 09-601-00 Waste Cartridge is Full
Causes: • Procon Assy, PL5.3.1 • Waste Toner Full Sensor PL5.3.13 • Exit Harness, PL11.1.7 • MCU Board, PL10.2.18
Remedy: 1 Reseat the Waste Toner Cartridge. The error persists. Go to Step 2. Complete. 2 Test the Waste Toner Full Sensor using dc330 (091-001). The signal changes (On/Off). Go to Step 3. Go to Step 4. 3 Check continuity of the Exit Harness between P/J16 on the MCU Board and P/J106 at the sensor. The harness is undamaged. Go to Step 4. Replace the Exit Harness. 4 Check for 5V at P/J16-6 on the MCU Board. Is 5V available at P/J16-6? Replace the Waste Toner Full Sensor. Go to Step 5. 5 Replace the Procon Assy. The error persists. Replace the MCU Board. Complete

← Xem tất cả mã lỗi Xerox Phaser 6700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie