Description: CMYK Imaging Unit is Near/Past End of Life or Missing The Imaging Unit CRUM indicates the Imaging Unit is near, past end of life, or missing. • 09-608-00 Cyan Imaging Unit is Near End of Life • 09-609-00 Magenta Imaging Unit is Near End of Life • 09-610-00 Yellow Imaging Unit is Near End of Life • 09-611-00 Black Imaging Unit is Near End of Life
Causes: • Yellow Imaging Unit, PL5.1.8 • Magenta Imaging Unit, PL5.1.9 • Cyan Imaging Unit, PL5.1.10 • Black Imaging Unit, PL5.1.11 • Imaging Unit CRUM, PL5.2.4 • MCU Board, PL10.2.18 • CRUM / Disp Harness, PL11.2.4
Remedy: • Replace the affected Imaging Unit. • Cycle system power. • If the problem persists, follow the procedure below. 1 Reseat the indicated Imaging Unit. The error persists. Go to Step 2. Complete. 2 Check connections between P/J12 on the MCU Board and indicated CRUM Connector: P/J208(Y), P/J209 (M), P/J210(C), P/J211 (K). The connection is secure. Go to Step 3. Secure the connection. 3 Check CRUM/Disp Harness continuity between P/J12 on the MCU Board and indicated CRUM Connector: P/J208(Y), P/J209 (M), P/ J210(C), P/J211(K). The harness is undamaged. Go to Step 4. Replace the CRUM/ Dispense Harness. 4 Check for 2.5V at P/J12-3(Y), -7(M), - 11(C), -15(K) on the MCU Board. Is 2.5V available to the indicated Imaging Unit CRUM? Replace the affected Imaging Unit. Replace the MCU Board.