Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 09-614-00, 09-631-00 — Xerox Phaser 6700

Code: 09-614-00, 09-631-00

Description: Fuser Envelope Lever is Up/Down The Envelope Mode Sensor indicates the Fuser’s envelope lever is in the wrong position for the media being fed. • 09-614-00 Fuser Envelope Lever is Up • 09-631-00 Fuser Envelope Lever is Down
Causes: • Envelop Mode Sensor PL7.2.10 • MCU Board, PL10.2.18 • Exit Harness, PL11.1.7
Remedy: 1 Remove the Fuser and check the envelope lever and actuator. The lever and actuator are undamaged. Go to Step 2. Replace the Fuser. 2 Test the Envelope Mode Sensor using dc330 (010-206). The signal changes (On/Off). Go to Step 3. Go to Step 4. 3 Check continuity of the Exit Harness between P/J20 on the MCU Board and P/J225 at the sensor. The harness is undamaged. Go to Step 4. Replace the Exit Harness. 4 Check for 3.3V at P/J20-1 on the MCU Board. Is 3.3V available at JJ20-1? Replace the Envelope Mode Sensor. Replace the MCU Board.

← Xem tất cả mã lỗi Xerox Phaser 6700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie