Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 09-662-00 — Xerox Phaser 6700

Code: 09-662-00

Description: Invalid Fuser The installed Fuser is incorrect, as reported by the Fuser CRUM, for this model.
Causes: • Fuser, PL7.1.99 • Fuser Harness, PL7.1.4 • MCU Board, PL10.2.18
Remedy: • Check Fuser part number. • Cycle system power. • If the problem persists, follow the procedure below.
1 Check the Fuser part number. The Fuser is correct for this model. Go to Step 2. Install the correct Fuser. 2 Check Fuser connections PJ180-S and P/J1 on the MCU Board. The connections are secure. Go to Step 3. Secure the connections. 3 Remove the Fuser harness and check continuity between P/J1 and P/ J180-S. The harness is undamaged. Go to Step 4. Replace the Fuser harness. 4 Replace the Fuser. The error persists. Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie