Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 10-330-00, 309.004.01 — Xerox Phaser 6700

Code: 10-330-00, 309.004.01

Description: Engine Motor Failure - CMY Developer Drive An error associated with the CMY Developer Drive Assembly was detected. • 309.004.01 YMC Developer Drive Assembly failure • 10-330-00 Engine Motor Failure
Causes: • Yellow Imaging Unit, PL5.1.8 • Magenta Imaging Unit, PL5.1.9 • Cyan Imaging Unit, PL5.1.10 • CMY Developer Drive, PL9.2.9 • Drive Gear Kit, PL9.2.99 • MCU Board, PL10.2.18 • Harness Assy LPP/ MOT, PL11.2.5
Remedy: 1 Cycle system power. Does the error persist? Go to Step 2. Complete 2 Check the Imaging Units for excessive wear or damage. Rotate each Imaging Unit mag roller (lower small white gear located at the back of the Imaging Unit) to check operation. The Imaging Units are undamaged. Go to Step 3. Replace the affected Imaging Unit. 3 Check P/J5 on the MCU Board and P/J252 on the CMY Developer Drive. The connections are secure. Go to Step 4. Secure the connections. 4 Test the CMY Developer Drive using dc330 (093-001). Does the motor rotate? Replace the MCU Board. Go to Step 5. 5 Check installation of the CMY Developer Drive. Is the drive installed correctly? Go to Step 6. Correct the installation. 6 Check continuity of the Harness Assy LPP/ MOT between P/J252 and P/J5 on the MCU Board. The harness is undamaged. Go to Step 7. Replace the harness. 7 Check for 24V at P/J315 on the LVPS. Is 24 V available at P/J315-1 when the Front Interlock Switch is closed? Go to Step 8. Replace the LVPS. 8 Replace the MCU Board. Does the error persist? Replace the CMY Developer Drive. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie