Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 10-330-00, 342.324.01 — Xerox Phaser 6700

Code: 10-330-00, 342.324.01

Description: Engine Motor Failure - Transfer Belt Drive Assembly An error associated with the Transfer Belt Drive (IBT Motor) was detected.
Causes: • Transfer Belt Drive, PL9.1.3 • MCU Board, PL10.2.18 • Harness Assy RH/ MOT, PL11.2.3
Remedy: 1 Cycle system power. Does the error persist? Go to Step 2. Complete 2 Check the Transfer Belt for excessive wear or edge damage. Rotate the Transfer Belt to check operation. The Transfer Belt is undamaged. Go to Step 3. Replace the Transfer Belt. 3 Check P/J7 on the MCU Board and P/J254 on the Transfer Belt Drive. The connections are secure. Go to Step 4. Secure the connections. 4 Test the IBT Motor Alarm signal using dc330 (093-019). The IBT Motor Alarm state is Off. Replace the MCU Board. Go to Step 5. 5 Replace the Transfer Belt Drive. The error persists. Visually inspect and test continuity of all applicable harnesses Complete.

← Xem tất cả mã lỗi Xerox Phaser 6700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie