Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 10-330-00, 342.325.01 — Xerox Phaser 6700

Code: 10-330-00, 342.325.01

Description: Engine Motor Failure - Imaging Unit Drive Assembly An error associated with the Imaging Unit Drive (Xero Drive Motor) was detected. • 10-330-00 Engine Motor Failure • 342.325.01 Xero Drive Motor failure
Causes: • Yellow Imaging Unit, PL5.1.8 • Magenta Imaging Unit, PL5.1.9 • Cyan Imaging Unit, PL5.1.10 • Imaging Unit Drive, PL9.2.6 • MCU Board, PL10.2.18 • Harness Assy DISP/FSR, PL11.2.6
Remedy: 1 Check the CMY Imaging Units for excessive wear or damage. Check rotation of the OPC Drum coupling (upper white gear located at the back of the Imaging Unit). The Imaging Units are undamaged and each drum rotates. Go to Step 2. Replace the affected Imaging Unit. 2 Cycle system power. Does the error persist? Go to Step 3. Complete 3 Test the Xero Drive Motor Alarm signal using dc330 (093-022). The Xero Drive Motor state is Off. Replace the MCU Board. Go to Step 4. 4 Replace the Imaging Unit Drive. The error persists. Visually inspect and test continuity of all applicable harnesses Complete.

← Xem tất cả mã lỗi Xerox Phaser 6700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie