Description: Staple is Jammed The staple home sensor in the Stapler indicates the staple motor could not rotate. • 12-423-00 Staple is jammed • 12-723-00 Staple is jammed
Remedy: 1 Test the Stapler motor using dc330 (012-046). The signal changes (On/Off) and an audible noise is heard. Go to Step 4. Go to Step 2. 2 Checking MOT1 Harness continuity between P/J8983 on the Finisher Main Board and P/J8887 from the Stapler. The harness is undamaged? Go to Step 3. Replace the harness. 3 Checking for 24V at P/J8983-1 and - 2 on the Finisher Main Board. Is 24V available at J8988-1and -3? Replace the Stapler. Go to Step 7. 4 Test the staple home sensor using dc330 (012-046). The signal changes (On/Off). Go to Step 7. Go to Step 5. 5 Checking SNR1 Harness continuity between P/J8988 on the Finisher Main Board and P/J8886 from the Stapler. The harness is undamaged? Go to Step 6. Replace the harness. 6 Checking for 5V at P/J8988-10 on the Finisher Main Board. Is 5V available at J8988-10 on the Finisher Main Board? Replace the Stapler. Secure the connection. 7 Replace the Finisher Main Board. The error persists. Replace the MCU Board. Complete.