Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 309.001.01, 309.002.02, 309.003.03 — Xerox Phaser 6700

Code: 309.001.01, 309.002.02, 309.003.03

Description: Laser Failure A Laser Unit failure was detected. • 09-000-00 Laser Failure • 309.001.01 Warm up error • 309.002.02 Rotation failure after ready • 309.003.03 Laser diode error
Causes: • Laser Unit, PL5.2.1 • MCU Board, PL10.2.18 • Rear Interlock Switch, PL1.3.6
Remedy: 1 Test the Laser Unit motor using dc330 (061-001). The Laser Unit is operational. Go to Step 7. Go to Step 2. 2 Remove the Rear Cover to check the Rear Interlock Switch. The switch is operational. Go to Step 3. Replace the switch. 3 Check P/J701 on the IP Board. The connection is secure. Go to Step 4. Secure the connection. 4 Check P/J303 on the LVPS. The connection is secure. Go to Step 5. Secure the connection. 5 Check PJ151, PJ152 and PJ153 on the Laser Unit. The connections are secure. Go to Step 6. Secure the connections. 6 Check P/J3 on the MCU Board. The connection is secure. Go to Step 7. Secure the connection. 7 Replace the Laser Unit. Does the error persist? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie