Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 309.003.01 — Xerox Phaser 6700

Code: 309.003.01

Description: Engine Motor Failure - K Developer Drive An error associated with the K Developer Drive Assembly was detected.
Causes: • Black Imaging Unit, PL5.1.11 • K Developer Drive, PL9.2.10 • MCU Board, PL10.2.18 • Drive Gear Kit, PL9.2.99 • Harness Assy LPP/ MOT, PL11.2.5
Remedy: 1 Cycle system power. Does the error persist? Go to Step 2. Complete 2 Check the Black Imaging Unit for excessive wear or damage. Rotate the Imaging Unit mag roller (lower small white gear located at the back of the Imaging Unit) to check operation. The Imaging Unit is undamaged. Go to Step 3. Replace the Black Imaging Unit. 3 Check P/J6 on the MCU Board and P/J253 on the K Developer Drive. The connections are secure. Go to Step 4. Secure the connections. 4 Test the K Developer Drive using dc330 (093-004). Does the motor rotate? Replace the MCU Board. Go to Step 5. 5 Check installation of the K Developer Drive. Is the drive installed correctly? Go to Step 6. Correct the installation. 6 Check continuity of the Harness Assy LPP/ MOT between P/J253 and P/J6 on the MCU Board. The harness is undamaged. Go to Step 7. Replace the harness. 7 Check for 24V at P/J6 of the MCU Board. Is 24 V available at P/J6-2 and -4 when the Front Interlock Switch is closed? Replace the K Developer Drive. Go to Step 8. 8 Replace the Drive Gear Kit. Does the error persist? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie