Description: Finisher Communication Failure The printer detected a communication failure with the Finisher. • 312.099.01 Data Link Disconnect • 312.099.02 Receive Buffer Overflow • 312.099.03 Data Link Disconnect • 312.099.04 Data Link Error • 312.099.05 Initialization Ack Error • 312.099.06 Initialization Complete Error • 312.099.07 Device Controller Error
Remedy: 1 Check system software version. The software is current. Go to Step 2. Update the system software. 2 Check Finisher connections P/J8890 and CN4 to the printer. The connections are secure and undamaged. Go to Step 3. Secure the connections. 3 Remove the Finisher I/F harness and check continuity between P/J8890 and CN4. The harness is undamaged. Go to Step 4. Replace the harness. 4 Check P/J22 on the MCU Board. The connection is secure and undamaged. Go to Step 5. Secure the connection. 5 Remove the Finisher harness and check continuity between P/J22 and P/J122. The harness is undamaged. Go to Step 6. Replace the harness. 6 Replace the Finisher Main Board. Does the error persist? Replace the MCU Board. Complete.