Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 316.151.01 ... 316.159.09 — Xerox Phaser 6700

Code: 316.151.01 ... 316.159.09

Description: Engine NVRAM Failure An NVM error was detected on the MCU Board. • 16-150-00 Engine NVRAM Failure • 316.151.01 NVM version read failure • 316.152.02 Copy area read failure of 3 area write data • 316.153.03 Ack error at 1-byte read • 316.154.04 Ack error at continuous read • 316.155.05 Write cannot start by device busy • 316.156.06 Cannot Write verify error • 316.157.07 Cannot finish write process • 316.158.08 Read error of verify data • 316.159.09 Write process retry over
Causes: • Engine NVRAM • MCU Board, PL10.2.18
Remedy: 1 Initialize Engine NVM using dc301, then exit and reboot the system. The error persists. Go to Step 2. Complete. 2 Use dc361 to save machine NVRAM contents to the IP Board. The transfer was successful. Restore the saved engine file. Go to Step 3. 3 Check the Engine Control (MCU) Board NVM Chip (U630) for correct installation. Is the NVM installed correctly? Replace the MCU Board. Reseat the NVRAM device in the MCU Board.

← Xem tất cả mã lỗi Xerox Phaser 6700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie