Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 345.301.01 ... 345.306.06 — Xerox Phaser 6700

Code: 345.301.01 ... 345.306.06

Description: Printer Failure An Interface failure was detected between the MCU and Image Processor Boards. • 345.301.01: Ack Received Sig High • 345.302.02: Ack Received Sig Low • 345.303.03: Receive Buffer Overflow • 345.304.04: Send Buffer Overflow High • 345.305.05: Send Buffer Overflow Low • 345.306.06: Software detects No I/O
Causes: • IP Board, PL10.1.5 • MCU Board, PL10.2.18 • Harness ESS PWR, PL11.1.3 • Harness ESS, PL11.1.10
Remedy: 1 Cycle system power. Does the error persist? Go to Step 2. Complete 2 Check P/J2 on the MCU Board and P/J802 on the IP Board. The connections are secure. Go to Step 3. Secure the connections. 3 Check continuity of the IP Board Harness between P/J802 and P/J2 on the MCU Board. The harness is undamaged. Go to Step 4. Replace the harness. 4 Check P/J321 on the IP Board and P/ J306 on the LVPS. The connections are secure. Go to Step 5. Secure the connections. 5 Check for 5V and 3.3V at P/J306 -3, 4 and 5 on the LVPS Is 5 and 3.3 V available at P/J306 when the Front Interlock Switch is closed? Go to Step 6. Replace the LVPS. 6 Replace the IP Board. Does the error persist? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie