Description: Jam at Tray 3 ~ 6 Right Side Door The Take Away Sensor detects media in the media path of the indicated feeder. • 373.102.05 Tray 3 Right Door Jam • 374.102.06 Tray 4 Right Door Jam • 375.102.07 Tray 5 Right Door Jam • 377.110.08 Option Regi On Jam • 377.901.09 Option Static Jam
Remedy: 1 Check Feed and Separator Rollers of the affected tray are installed correctly, free of contamination and not worn. The rollers are clean and undamaged. Go to Step 2. Clean or replace the affected rollers. 2 Test the Take Away Sensor for the affected tray using dc330: • Tray 3 (73-001) • Tray 4 (74-007) • Tray 5 (75-007) • Tray 6 (76-010) The sensor signal changes (On/Off). Go to Step 4. Go to Step 3 3 Check for 3.3V at P/J353-5 on the Feeder Board. Is 3.3 V available at P/J353-5 when the Interlock Switch is closed? Replace the Take Away Sensor. Go to Step 9. 4 Test the Feed Drive Motor Alarm for the affected tray using dc330: • Tray 3 (73-012) • Tray 4 (74-006) • Tray 5 (75-004) • Tray 6 (76-009) The motor rotates (On/Off). Replace the Feed Drive. Go to Step 5. 5 Test the Take Away Clutch for the affected tray using dc771: • Tray 3 (73-013) • Tray 4 (74-004) • Tray 5 (75-005) • Tray 6 (76-005) The clutch signal changes (On/Off). Go to Step 7. Go to Step 6. 6 Check for 24V at P/J354-1 on the affected Trayfs Feeder Board. Is 24 V available at P/J355-1 when the Interlock Switch is closed? Replace the Take Away Clutch. Go to Step 9. 7 Test the Feed Clutch for the affected tray using dc330: • Tray 3 (73-014) • Tray 4 (74-005) • Tray 5 (75-005) • Tray 6 (76-005) The clutch signal changes (On/Off). Go to Step 8 Go to Step 9. 8 Check for 24V at P/J354-3 on the affected Trayfs Feeder Board. Is 24 V available at P/J354-3 when the Interlock Switch is closed? Replace the Feed Clutch. Go to Step 9. 9 Replace the Feeder Board. Does the error persist? Go to Step 10. Complete. 10 Replace the MCU Board. Does the error persist? Visually inspect and test continuity of all applicable harnesses. Complete.