Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 377.101.03, 377.102.01, 377.123.02, 377.131.07, 377-900-10 — Xerox Phaser 6700

Code: 377.101.03, 377.102.01, 377.123.02, 377.131.07, 377-900-10

Description: Jam at Right Side Door Media remains at the Registration Sensor or in the duplex path. • 377.101.03: Regi Off Jam • 377.102.01: Psync On Jam • 377.123.02: Duplex Regi On Jam • 377.131.07: Duplex On Jam • 377-900-10: Static Jam
Causes: • Feeder Assembly, PL3.2.1 • Registration Sensor Actuator, PL3.3.20 • Registration Sensor, PL3.3.22 • Registration Sensor Harness, PL3.3.23 • Duplex Drive Clutch, PL4.3.9 • Duplex Roller, PL4.3.10 • Exit Inverter Solenoid, PL7.3.3 • Feed Drive, PL9.1.4 • MCU Board, PL10.2.18 • Registration Harness, PL11.1.5 • OPT/CL Harness, PL12.3.12
Remedy: 1 Check the Transfer Belt, Transfer Roller and Fuser installation. The parts are installed correctly. Go to Step 2. Correct the installation. 2 Check the Registration Sensor Actuator. The actuator is undamaged and moves freely. Go to Step 3. Replace the actuator. 3 Test the Registration Sensor using dc330 (10-202). The signal changes (On/Off). Go to Step 5. Go to Step 4. 4 Check for 3.3V at P/J10-7 on the MCU Board. Is 3.3 V available at P/J10-7 when the Front Interlock Switch is closed? Replace the Registration Sensor. Replace the MCU Board. 5 Is the media jam at the registration area behind the Right Door Assy? Go to Step 6. Go to Step 9. 6 Inspect the registration rollers. The rollers are clean and undamaged. Go to Step 7. Clean or replace the rollers. 7 Test the registration rollers using dc711 (Registration Roller). The registration rollers rotate. Go to Step 8. Replace the Feeder/ Registration Assy. 8 The error persists. Replace the MCU Board, Complete. 9 Is the media jam in the duplex area? Go to Step10. Go to Step 16. 10 Inspect the Duplex Rollers. The rollers are clean and undamaged. Go to Step 11. Clean or replace the Duplex Rollers. 11 Test the Duplex Roller using dc771. The roller rotates (On/Off). Go to Step 16. Go to Step 12. 12 Test the Duplex Drive Clutch using dc330 (77-001). The clutch signal turns (On/Off). Go to Step 14. Go to Step 13. 13 Check for 24V at P/J9-12 on the MCU Board. Is 24V available at P/J9-12 when the Right Door Interlock Switch closed? Replace the Duplex Drive Clutch. Replace the MCU Board. 14 Test the Feed Drive using dc330 (10- 008) The Feed Drive rotates. Go to Step 16. Go to Step 15. 15 Check for 24V at P/J7B-2 and 7B-4 on the MCU Board. Is 24 V available at P/J7B-2 and 7B- 4 when the Right Door Interlock Switch is closed? Replace the Feed Drive Assy. Replace the MCU Board. 16 Is the media jam in the Inverter Chute area? Go to Step 17. Confirm jam location. 17 Test the Exit Inverter Solenoid using dc330 (10-013) The Solenoid moves Up/Down? Go to Step 19. Go to Step 18. 18 Check for 3.3V at P/J19 on the MCU Board. Is 3.3V available at P/J19-16 when the Front Interlock Switch is closed? Replace the Exit Inverter Solenoid. Go to Step 19. 19 Replace the MCU Board. The error persists. Visually inspect and test continuity of all applicable harnesses. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie