Description: Jam at Fuser The Fuser exit sensor indicates media remains in the Fuser. • 377.103.06: Exit Off Jam • 377.104.05: Exit Off Early Jam • 377.106.04: Exit On Jam
Remedy: 1 Check the Fuser rollers, gear and connector for damage or debris. The rollers, gear and connector are undamaged. Go to Step 2. Replace the Fuser. 2 Test the Fuser exit sensor using dc330 (10-205). The signal changes (On/Off). Go to Step 8. Go to Step 3. 3 Check P/J1 on the MCU Board and P/J304 on the LVPS. The connections are secure. Go to Step 4. Secure the connections. 4 Check for 3.3V at P/J180-S pin 10 on the Fuser Harness. Is 3.3 V available at P/J180-S pin 10 when the Interlock Switch is closed? Replace the Fuser. Go to Step 5. 5 Check for 3.3V at P/J1-4 on the MCU Board. Is 3.3V available at P/J1-4 when the Interlock Switch is closed? Replace the Fuser Harness. Go to Step 5. 6 Check for 3.3V at P/J308-4 on the LVPS. Is 3.3V available at P/J308-4 when the Front Interlock Switch is closed? Go to Step 7. Replace the LVPS. 7 Check continuity of the LVPS Harness between P/J308 and PJ24 on the MCU Board. The harness in undamaged. Go to Step 8. Replace the harness. 8 Test the Fuser Drive using dc330 (10-008) The Fuser Drive rotates. Go to Step 15. Go to Step 8. 9 Check P/J4 on the MCU Board and P/J250 at the motor. The connections are secure. Go to Step 9. Secure the connections. 10 Check for 24V at P/J250-7 and -9 on the Feed Drive. Is 24 V available at P/J250-7 and -9 when the Right Door Interlock Switch is closed? Replace the Feed Drive Assy. Go to Step 11. 11 Check continuity of the Dispense/ Fuser harness between P/J4B on the MCU Board and P/J250 on the Feed Drive motor. The harness is undamaged. Go to Step 12. Replace the harness. 12 Check for 24V at P/J23-1,-2, and -3 on the MCU Board. Is 24 V available at P/J23 with the Right Door Interlock Switch closed? Replace the MCU Board. Replace the harness. 13 Check for 24V at P/J305-1,-2, and -3 on the LVPS. Is 24V available at P/J305 when the Interlock Switch is closed? Go to Step 13. Replace the LVPS. 14 Check continuity of the LVPS PWR Harness between P/J305 and PJ23 on the MCU Board. The harness in undamaged. Replace the MCU Board. Replace the harness.