Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 391.901.02 ... 391.908.03 — Xerox Phaser 6700

Code: 391.901.02 ... 391.908.03

Description: Imaging Unit Failure A communication or CRUM data failure was detected in one or more of the Imaging Units. • 391.901.02 Black (K) Imaging Unit communication error • 391.903.02 Yellow (Y) Imaging Unit communication error • 391.905.02 Magenta (M) Imaging Unit communication error • 391.907.02 Cyan (C) Imaging Unit communication error • 391.902.03 Black (K) Imaging Unit Data error • 391.904.03 Yellow (Y) Imaging Unit Data error • 391.906.03 Magenta (M) Imaging Unit Data error • 391.908.03 Cyan (C) Imaging Unit Data error
Causes: • Yellow Imaging Unit, PL5.1.8 • Magenta Imaging Unit, PL5.1.9 • Cyan Imaging Unit, PL5.1.10 • Black Imaging Unit, PL5.1.11 • CRUM Connector Assy, PL5.2.4 • Harness CRUM/ DISP, PL11.2.4 • MCU Board, PL10.2.18
Remedy: 1 Reseat the affected Imaging Unit and cycle system power. Does the error persist? Go to Step 2. Complete. 2 Replace the affected imaging Unit. Does the error persist? Go to Step 3. Complete. 3 Check P/J12 on the MCU Board and Imaging Unit CRUM connectors: • P/J208 (Y) • P/J209 (M) • P/J210 (C) • P/J211 (K) The connections are secure. Go to Step 4. Secure the connections. 4 Check continuity of the Dispense/ CRUM harness. The harness is undamaged. Go to Step 5. Replace the harness. 5 Check for 2.5V at P/J12-3, -7, -11, or -15 on the MCU Board. Is 2.5 V available at P/J12 for the affected Imaging Unit? Replace the Imaging Unit CRUM Connector. Replace the MCU Board

← Xem tất cả mã lỗi Xerox Phaser 6700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie