Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 392.310.01, 392.311.02, 392.320.01 — Xerox Phaser 6700

Code: 392.310.01, 392.311.02, 392.320.01

Description: Density Sensor Failure - ADC Sensor An error was detected in the Front or Rear ADC sensor located in the Procon Assembly. • 392.310.01 CTD Rear Sensor Vdark error • 392.311.02 CTD Rear Sensor Vcin error • 392.320.01 CTD Front Sensor AD transition value error
Causes: • Procon Assy, PL5.3.1 • MCU Board, PL10.2.18 • Harness Erase/Exit, PL11.2.1
Remedy: 1 Check P/J17 on the MCU Board and P/J108 on the Procon Assy. The connections are secure. Go to Step 2. Secure the connection. 2 Check continuity of the Erase/Exit Harness between P/J108 and PJ17 on the MCU Board. The harness in undamaged. Go to Step 3. Replace the harness. 3 Check for 5V at P/J17-9 and -14 on the MCU Board. Is 5V available at P/J17-9 and -14 when the Front Interlock Switch is closed? Replace the Procon Assy. Go to Step 4. 4 Check for 5V at P/J24-17 on the MCU Board. Is 5V available at P/J24-17 when the Front Interlock Switch is closed? Replace the MCU Board. Go to Step 5. 5 Check continuity of the LVPS Harness between P/J308 and PJ24 on the MCU Board. The harness in undamaged. Replace the LVPS. Replace the harness. 6 If the error persists, replace these components, in order, until the error is resolved. 1. Procon Assy, PL5.3.1 2.MCU Board, PL10.2.18

← Xem tất cả mã lỗi Xerox Phaser 6700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie