Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 392.670.01 ... 392.673.01 — Xerox Phaser 6700

Code: 392.670.01 ... 392.673.01

Description: Imaging Unit Failure A calibration patch error (low image density) was detected. • 392.670.01 Yellow image adjustment patch error • 392.671.01 Magenta image adjustment patch error • 392.672.01 Cyan image adjustment patch error • 392.673.01 Black image adjustment patch error
Causes: • Yellow Imaging Unit, PL5.1.8 • Magenta Imaging Unit, PL5.1.9 • Cyan Imaging Unit, PL5.1.10 • Black Imaging Unit, PL5.1.11 • Transfer Belt, PL5.1.1 • HVPS, PL5.2.3 • Harness Assy ROS/HV (PL11.2.2) • MCU Board, PL10.2.18
Remedy: 1 Reseat the affected Imaging Unit and cycle system power. Does the error persist? Go to Step 2. Complete. 2 Replace the affected imaging Unit. Does the error persist? Go to Step 3. Complete. 3 Reseat the Transfer Belt and cycle system power. Does the error persist? Go to Step 4. Complete. 4 Replace the Transfer Belt. Does the error persist? Go to Step 5. Complete. 5 Check P/J332 on the HVPS and the HV contacts to the Bias Transfer Assy. The connections are secure. Go to Step 6. Secure the connections. 6 Check P/J13 on the MCU Board and P/J331 on the HVPS. The connections are secure. Go to Step 5. Secure the connections. 7 Check continuity of the ROS/HV Harness between P/J331 and PJ31 on the MCU Board. The harness in undamaged. Replace the HVPS. Replace the MCU Board. 8 If the error persists, replace these components, in order, until the error is resolved. 1. Bias Housing Assy, PL 5.2.2 2.HVPS, PL5.2.3 3. Harness Assy ROS/HV (PL11.2.2) 4.MCU Board, PL10.2.18

← Xem tất cả mã lỗi Xerox Phaser 6700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie