Description: Transfer Belt Failure Communication error with the Transfer Belt was detected. • 42-601-00 Transfer Belt Failure • 342.601.02 Transfer Belt communication failure • 342.602.03 Transfer Belt data error
Causes: • Transfer Belt Drive, PL9.1.3 • MCU Board, PL10.2.18 • Harness Assy RH/ MOT, PL11.2.3
Remedy: 1 Cycle system power. Does the error persist? Go to Step 2. Complete 2 Replace the Transfer Belt. Does the error persist? Go to Step 3. Complete 3 Check P/J7 on the MCU Board and P/J254 on the Transfer Belt Drive. The connections are secure. Go to Step 4. Secure the connections. 4 Test the Transfer Belt Drive using dc330 (094-001). Does the motor rotate? Replace the MCU Board. Go to Step 5. 5 Check Transfer Belt Drive installation. Is the drive installed correctly? Go to Step 6. Correct the installation. 6 Check continuity of the Harness Assy RH/ MOT between P/J254 and P/J7 on the MCU Board. The harness is undamaged. Go to Step 7. Replace the harness. 7 Check for 24V at P/J7 of the MCU Board. Is 24 V available at P/J6-2 and -4 when the Front Interlock Switch is closed? Replace the Transfer Belt Drive. Replace the MCU Board.