Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 73-102-00, 74-102-00, 75-102-00, 76-102-00 — Xerox Phaser 6700

Code: 73-102-00, 74-102-00, 75-102-00, 76-102-00

Description: Jam at Tray 3 ~ 6 Right Side Door The Take Away Sensor detects media in the media path of the indicated feeder. • 73-102-00 Jam at Tray 3 Right Side Door • 74-102-00 Jam at Tray 4 Right Side Door • 75-102-00 Jam at Tray 5 Right Side Door • 76-102-00 Jam at Tray 6 Right Door Jam
Causes: • MCU Board, PL10.2.18 • Feed Drive, PL12.3.2 • Feeder Board, PL12.3.4 • Harness OPT MOT, PL12.3.5 • Harness OPT CL, PL12.3.12 • Take Away Sensor, PL12.4.3 • Take Away Clutch, PL12.4.5 • Feed Clutch, PL12.4.9 • Feed & Separator Roller Kit, PL12.4.99
Remedy: 1 Check Feed and Separator Rollers of the affected tray are installed correctly, free of contamination and not worn. The rollers are clean and undamaged. Go to Step 2. Clean or replace the affected rollers. 2 Test the Take Away Sensor for the affected tray using dc330: • Tray 3 (73-001) • Tray 4 (74-007) • Tray 5 (75-007) • Tray 6 (76-010) The sensor signal changes (On/Off). Go to Step 4. Go to Step 3 3 Check for 3.3V at P/J353-5 on the Feeder Board. Is 3.3 V available at P/J353-5 when the Interlock Switch is closed? Replace the Take Away Sensor. Go to Step 9. 4 Test the Feed Drive Motor Alarm for the affected tray using dc330: • Tray 3 (73-012) • Tray 4 (74-006) • Tray 5 (75-004) • Tray 6 (76-009) The motor rotates (On/Off). Replace the Feed Drive. Go to Step 5. 5 Test the Take Away Clutch for the affected tray using dc771: • Tray 3 (73-013) • Tray 4 (74-004) • Tray 5 (75-005) • Tray 6 (76-005) The clutch signal changes (On/Off). Go to Step 7. Go to Step 6. 6 Check for 24V at P/J354-1 on the affected Trayfs Feeder Board. Is 24 V available at P/J355-1 when the Interlock Switch is closed? Replace the Take Away Clutch. Go to Step 9. 7 Test the Feed Clutch for the affected tray using dc330: • Tray 3 (73-014) • Tray 4 (74-005) • Tray 5 (75-005) • Tray 6 (76-005) The clutch signal changes (On/Off). Go to Step 8 Go to Step 9. 8 Check for 24V at P/J354-3 on the affected Trayfs Feeder Board. Is 24 V available at P/J354-3 when the Interlock Switch is closed? Replace the Feed Clutch. Go to Step 9. 9 Replace the Feeder Board. Does the error persist? Go to Step 10. Complete. 10 Replace the MCU Board. Does the error persist? Visually inspect and test continuity of all applicable harnesses. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie