Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 75-530-00, 75-532-00, 75-535-00 — Xerox Phaser 6700

Code: 75-530-00, 75-532-00, 75-535-00

Description: Tray 2 ~ 6 is Empty The No Paper Sensor indicates the Tray is empty or nearly empty. • 75-530-00 Tray 5 is Empty • 75-532-00 Tray 5 paper not available. • 75-535-00 Tray 5 is nearly empty
Causes: • No Paper Actuator, PL3.2.10 • No Paper Sensor, PL3.2.11 • No Paper Sensor Harness, PL3.2.12 • Feeder Assy, PL3.2.1, PL12.4.29 • Feeder Board, PL12.3.4 • Registration Sensor Harness, PL3.3.23 • Lower Option Harness, PL12.3.11 • MCU Board, PL10.2.18
Remedy: 1 Check the No Paper Sensor Actuator for obstructions or damage. The actuator is undamaged. Go to Step 2. Replace the Actuator. 2 Test the No Paper Sensor for the affected Tray using dc330: • Tray 2 (72-105) • Tray 3 (73-002) • Tray 4 (74-008) • Tray 5 (75-008) • Tray 6 (76-011) The sensor signal changes (On/Off). Replace the MCU Board. Go to Step 3. 3 Check for 3.3V at P/J10-10 on the MCU Board or P/J353-6 on the Feeder Board. Is 3.3 V available at P/J10-10 or P/J353-6? Replace the No Paper Sensor. Go to Step 4. 4 Replace the MCU Board or Feeder Board. The error persists. Visually inspect and test continuity of all applicable harnesses. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie