Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi -09 — Xerox Phaser 7300

Code: -09

Description: Close Right Door [B] [C] [D] [E]
Remedy: 1 Inspect the door actuator for damage or defects. Replace the Tray Go to step [2]. 2 Inspect the door switch for damage, defects or obstructions. Replace the Switch. Go to step [3]. 3 Use service diagnostics to test the switch. Note: Switch tests for all the doors are located under the Interlock Switches Menu. Does the switch function correctly? Replace the Engine Controller Board. Go to step [4]. 4 Close the door and check for +5 volts at pin 3 of the STDUCOV on the LTA Controller Board. Replace the wiring harness and/or Switch. Replace the LTA Controller Board.

← Xem tất cả mã lỗi Xerox Phaser 7300

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie