Code: -13
Description: Replace [CMYK] Imaging Unit
Remedy: 1 Cycle power to the printer and ensure all error messages are cleared. Did the error reappear? Go to step [2]. Complete. 2 Use service diagnostics, or print a Supplies Page, to verify if the Imaging Unit is at or near end-of-life? Note: If the Imaging Unit count is reset using service diagnostics, the gas gauge will not return to 100% because pixel counts are not reset. Have the customer replace the Imaging Unit. Go to step [3]. 3 Install a new Imaging Unit and check to see if the fuse blew after installation. Replace the EEPROM on the Engine Controller Board. Replace the Engine Controller Board.