Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi -14 — Xerox Phaser 7300

Code: -14

Description: Install or Reseat [CMYK] Toner Cartridge
Remedy: 1 Has all the tape and packaging material been removed from the Toner Cartridge? Go to step [2]. Remove the material. 2 Is the Toner Cartridge installed and seated properly? Go to step [2]. Reseat the Toner Cartridge. 3 Remove the toner cartridge and tap on a hard surface to break up any compacted toner in the toner cartridge. Reinstall the toner cartridge. Does the error still appear? Go to step [4]. Complete. 4 Verify the toner sensor magnets are properly seated in the toner sensor actuators. Are the magnets seated properly? Go to step [5]. Replace the Toner Sensor Actuator. 5 Use service diagnostics to check the CMYK Toner Cartridge Sensor. Does the sensor function correctly? Replace the Engine Controller Board. Go to step [6]. 6 Is the toner sensor board wiring harness free from defects and securely connected? Replace the Engine Controller Board. Replace the wiring harness or Toner Sensor Board.

← Xem tất cả mã lỗi Xerox Phaser 7300

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie