Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi -16 — Xerox Phaser 7300

Code: -16

Description: Install or Reseat Fuser
Remedy: 1 Is the Fuser Unit installed and seated properly? Go to step [2]. Reseat the Fuser. 2 Visually inspect the Fuser latches. Are the latches damaged or defective? Replace the Fuser latches. Replace in the following order: Fuser Engine Controller Board Low Voltage Power Supply and wiring harness.

← Xem tất cả mã lỗi Xerox Phaser 7300

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie