Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi -17 — Xerox Phaser 7300

Code: -17

Description: Replace Fuser
Remedy: 1 Use service diagnostics to check the Fuser life. Is the fuser at or near end-of-life? Have the customer replace the Fuser. Go to step [2]. 2 Verify that all other errors have been cleared on the printer and install a new fuser. Did the fuse on the new Fuser blow? Replace the Engine Controller Board EEPROM. Replace in the following order: Fuser Engine Controller Board Low Voltage Power Supply and wiring harness.

← Xem tất cả mã lỗi Xerox Phaser 7300

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie