Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi -18 — Xerox Phaser 7300

Code: -18

Description: Install or Reseat Transfer Unit
Remedy: 1 Is the transfer unit installed and seated properly? Go to step [2]. Reseat the transfer unit. 2 Check the Transfer Unit voltage contacts for corrosion, dirt or debris. Clean with a pencil eraser. Replace in the following order: Engine Controller Board. High Voltage Power Supply and wiring harness.

← Xem tất cả mã lỗi Xerox Phaser 7300

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie