Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C1 ... C5 — Xerox Phaser 7300

Code: C1 ... C5

Description: Insert Tray [1] [2] [3] [4] [5] C1: Tray 1 C2: Tray 2 C3: Tray 3 C4: Tray 4 C5: Tray 5
Remedy: 1 Ensure the tray is properly installed and seated correctly. Go to step [2]. Reseat the Paper Tray. 2 Inspect the tray for damage or defects. Replace the Tray. Go to step [3]. 3 Use service diagnostics to test the paper size sensors. Do the sensors function correctly? Replace the Tray. Go to step [4]. 4 Check the wiring from the paper size sensing board to the Engine Controller Board or the LTA Controller Board. Is the wiring free from damage or defects? Tray 1 - Replace the Engine Controller Board. Tray 2, 3, 4, 5 - Replace the LTA Controller Board. Replace the wiring harness.

← Xem tất cả mã lỗi Xerox Phaser 7300

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie