Code: T1, T2
Description: T1: Fuser Upper Failure T2: Fuser Lower Failure
Remedy: 1 Reseat the Fuser Unit. Did the error reappear? Go to step [2]. Complete 2 Check the resistance of the lamps. See “Fuser Roller Resistances” on page 3-75 Go to step [3]. Replace the Fuser. 3 Check the Fuser thermistors. Are the thermistors damaged or misaligned, not in contact with the rollers? Replace the Fuser. Go to step [4]. 4 Is there AC voltage to the low voltage power supply CN1 connector? Replace the Engine Controller Board. Replace Low Voltage Power Supply.