Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U6 — Xerox Phaser 7300

Code: U6

Description: Power Supply Failure
Remedy: 1 Visually inspect the LVPS fans for proper operation and airflow. Are the fans operating correctly? Go to step [4]. Go to step [2]. 2 Verify +34 volts is being supplied to fuse F7 on the Engine Controller Board. Is there +34 volts? Replace the fan. Go to step [3]. 3 Verify the Low Voltage Power Supply to the POWER connector on the Engine Controller Board is supplying +34 volts to pins 12, 13, and 14. Replace the Engine Controller Board. Replace the Low Voltage Power Supply and/or wiring harness. 4 Turn the printer off, remove the Duplex Unit, then turn the printer back on. Does the error still appear? Replace in the following order: Transfer Unit LVPS HVPS Engine Controller Board. Replace the Duplex Unit.

← Xem tất cả mã lỗi Xerox Phaser 7300

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie