Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U9 — Xerox Phaser 7300

Code: U9

Description: Power Supply Fan Failure
Remedy: 1 Visually inspect the front and rear LVPS fans for proper operation and airflow. Run service diagnostics to test the Rear Fuser Fan. Do the fans operate correctly. Replace the Engine Controller Board. Go to step [2]. 2 Verify +34 volts is being supplied to fuse F7 on the Engine Controller Board. Is there +34 volts? Replace the defective fan and wiring harness. Go to step [3]. 3 Verify the Low Voltage Power Supply to the POWER connector on the Engine Controller Board is supplying +34 volts to pins 12, 13, and 14. Replace the Engine Controller Board. Replace the Low Voltage Power Supply and/or wiring harness.

← Xem tất cả mã lỗi Xerox Phaser 7300

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie