Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi W16 — Xerox Phaser 7300

Code: W16

Description: Fuse Cut Error in Fuser
Remedy: 1 Install a new Fuser and verify the fuse blows. Does the error still appear? Go to step [2]. Complete 2 Check the wiring harness between the LVPS to the POWER connector on the Engine Controller Board. Is there a short in the wiring harness? Replace the wiring harness. Replace in the following order: Engine Controller Board LVPS

← Xem tất cả mã lỗi Xerox Phaser 7300

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie