Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi W17 — Xerox Phaser 7300

Code: W17

Description: Fuse Cut Error in Transfer Unit
Remedy: 1 Install a new Transfer Unit and verify the fuse blows. Does the error still appear? Go to step [2]. Complete 2 Check the JODEN wiring harness between Imaging Unit Sensor Board and Engine Controller Board. Is there a short in the wiring harness? Replace the wiring harness. Replace in the following order: Engine Controller Board Replace the Back Plate w/Drive Gear.

← Xem tất cả mã lỗi Xerox Phaser 7300

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie